TK6913 CNC floor type boring and milling machine

1.boring and milling machine 2.boring spindle dia.130mm 3.CNC system:siemens840D 4.with boring and milling spindle

1. Introduction of cnc floor type boring and milling machine

(1) CNC Floor type Boring machine is a general-purpose machine which is designed and manufactured with new technology such as modern mechanical, electrical and hydraulic technologies.

(2) This machine not only has extendable boring spindle to carry out the machining by common floor-type boring machines but also has extendable square ram which is equipped with both milling and boring spindle.

(3) It adopts a lot of advanced automatic accuracy compensation technologies, such as pre-pressed, on play, high accuracy ball screw drive in axes X,Y,Z,W, multi-point, closed multi-point hydrostatic guideways on linear guideways with dynamic and static friction coefficient of no crawling at low speed.

(4) The CNC system of the machine adopts the German Siemens 840D CNC system, realizing the simultaneous motion of any 4 axes, This machine can complete milling, boring, drilling, tapping and curve surface and curve line machining in five axes (such as propeller blade) through one set-up.

(5) It is the mechanical-electric integral product of high automatization and hi-tech with high accuracy and excellent rigidity. If equipped with vertical, universal, extended milling heads and CNC rotary table, it can be applied on wider range, especially on large, heavy and super heavy complicated parts.

(6) It is the key equipment for national important equipment and industry, which can replace the imports. It has reached the international advanced level but the price is 3 times lower than the same product abroad. It has strong competitive ability in the market and can be widely used in military industry, nuclear energy, metallurgical, shipbuilding, aviation, traffic industry and national important machinery industry enterprise.

2. The machine data of TK6913 floor type boring and milling machine

Boring spindle diameter	130mm
Milling spindle-face diameter	221.44mm
Ram dimensions	380×420mm
Boring spindle taper	ISO50
Boring spindle travel	800mm
Ram travel	600mm
Total travel of boring spindle and ram	1400mm
Headstock travel	2800mm
Column travel	4000mm
Spindle speed(stepless)	3.15-800rpm
Working feed of boring spindle	1-2000mm/min
Working feed of ram	1-2000mm/min
Rapid feed of boring spindle	4000mm/min
Rapid feed of ram	4000mm/min
Working feed of column and headstock	1-3000mm/min
Rapid feed of column and headstock	6000mm/min
Distance from spindle axis to working Surface of the fixed table	560-3360mm
Main motor power	37kw
Positioning accuracy: X,Y, Z, W axis	0.025mm
Repositioning precision: X,Y, Z, W axis	0.025mm
CNC control system	FAGOR 8055

 

3. Structural parts pictures

 

 

TK6913 CNC floor type boring and milling machine